The Cold Spray Revolution

  • Source:  ARL.
    Source: ARL.
Format: 
Webinar
Presentation Date: 
Jan 30 2019 - 12:00pm to 12:45pm
Host: 
The Defense Systems Information Analysis Center (DSIAC)
Presenter(s): 

Join us for a live webinar presentation on "The Cold Spray Revolution!"


The deposition of metal powders onto surfaces has been done by thermal spray for over 100 years. In this process, metal particles are melted and blown onto the coated surface. Thermal spray processes thus apply engineered coatings to modify the surface properties of an item. These coatings can provide such properties as enhanced wear resistance, thermal barriers, electrical/thermal conductivity, hard-chrome replacement, and corrosion protection. The coatings can be applied to turbine blades, shaft seals, medical implants, etc. 

The extreme heat required in thermal spray can compromise the powder and substrate characteristics. Cold spray was introduced 30 years ago as a solution to prevent heat damage. Cold spray accelerates powder particles to very high velocity in a supersonic nozzle, and a deposit is formed when the particles impact on the surface. Cold spray material deposition differs significantly from thermal spray deposition systems in that the cold spray process does not melt particles, particle velocities are very high, and the gas/particle jet plume has a relatively low temperature. Cold spray can thus be used in applications with heat-sensitive substrates, or applications that do not allow heat-modified deposits. The impact of the consolidation of high-velocity, solid state particles yields cold spray depositions with high strength, low porosity, and minimal residual stress.

The Army Research Laboratory (ARL) was the first Department of Defense (DoD) facility to employ cold spray, and has demonstrated its use for many military and commercial applications. This presentation will describe the cold spray process and the coatings that it can produce. Several applications developed at ARL will be shown.

Webinar Instructions

  1. Click on Go to Webinar link below.
  2. Enter a guest name and click Join the meeting.
  3. If you have not yet downloaded the Skype for Business Web App, you will be prompted to do so.
  4. Follow your web browser's instructions for downloading and installing the Skype for Business Web App plug-in.