Upcoming Webinars

Filter by Community
Filter by Title

Sorry, there are no upcoming webinars available at this time.

Past Webinars

U.S. Army Photo Illustration by Staff Sgt. Teddy Wade
The operational reliability of defense systems is a challenge that affects the performance of those systems throughout our technical and operations community. There are...
Presentation Date: 
September 26, 2019 12:00 pm to 12:45 pm EDT
High Power Radio Frequency / Microwave Directed Energy Weapon Effects
This webinar introduces directed energy weapons (DEWs) and their effects – specifically, high-power, radio frequency/microwave (HPM) DEWs. The presentation covers what...
Presentation Date: 
July 30, 2019 12:00 pm to 12:45 pm EDT
(Source: https://hackernoon.com/machine-learning-applications-393f493f871a)
Securing our critical infrastructure is vital to national security. This presentation demonstrates techniques that can be used to detect cyberattacks or equipment...
Presentation Date: 
November 26, 2019 12:00 pm to 12:45 pm EST
(Source: NSWC-IHEODTD)
The benefit of additive manufacturing is being realized in industries where custom parts can be made when traditional manufacturing methods and economics fall short. In...
Presentation Date: 
November 14, 2019 12:00 pm to 12:45 pm EST
(Source: http://cdn.arstechnica.net/wp-content/uploads/2016/04/Avs8YOaCQAAO_mk.jpg)
There are many engine cycles available to the designer of liquid rocket propulsion systems--from pressure-fed to full-flow, staged combustion, each with its own...
Presentation Date: 
October 29, 2019 12:00 pm to 12:45 pm EDT
A field-programmable gate array (FPGA) in a 'development kit' for programming and testing. The FPGA is the large central chip with white paste on it. Source: Author's fieldwork photograph.
FPGA's use in complex sensor systems is growing rapidly. Radar, communication, navigation, and weapon systems are increasingly relying on the speed, flexibility, and...
Presentation Date: 
June 26, 2019 12:00 pm to 12:45 pm EDT
Cryomilled 17-4 Stainless Steel Powder as Feedstock for Additive Manufacturing image
Additive manufacturing (AM) powders supplied by the manufacturer are gas atomized and supplied without post treatment. By including a pre-processing treatment prior to...
Presentation Date: 
May 29, 2019 12:00 pm to 12:45 pm EDT
Cyber Survivability - Keeping Mission Systems Survivable in the Event of a Mission-Based Cyberattack image
In the military environment, survivability is defined as the ability to remain mission capable after a single engagement. In this seminar, we extend the traditional...
Presentation Date: 
May 14, 2019 12:00 pm to 12:45 pm EDT
https://www.nwuav.com/
Adapting the proper engine to align with the operational objectives of the unmanned aerial system (UAS) airframe is not a singular consideration. Developing powerplants...
Presentation Date: 
March 27, 2019 12:00 pm to 12:45 pm EDT
Source: NTS
X-ray Computed Tomography (XCT) scanning has been in use for decades, and it remains a key component in non-destructive testing (NDT). XCT allows a user to create a...
Presentation Date: 
February 27, 2019 12:00 pm to 12:45 pm EST